Plastic Parts & Molds

Capabilities for Plastic Parts & Molds include:

Mold Types
Blow, Casting, Cold runner, Compression, Cores, Gas assist, Hot runner (e.g. DME, Hasco, etc.), Injection, Injection / compression, Inserts, Jigs / Fixtures, Liquid injection, Metal injection, Reaction injection, Reinforced plastic, Single / multi-cavity, Stack, Stretch blow, Textured, Thermoform, Three-plate, Transfer, Two material, Two-plate, Two-shot, Unscrewing.

Mold Manufacturing Processes
Boring, CNC milling, Coatings / treatment, Corrosion protection, Cutting, Drilling, EDM sinker, EDM small hole, EDM wire, Electrode making, Engraving, Finishing, Grinding, Gun / deep hole drilling, High-speed machining, High-speed / hard milling, Laser cutting, Laser digitizing, Laser scanning, Plating, Polishing, Tapping, Water Jet, Welding.

Plastic Manufacturing Processes
Injection molding (50 tons to 650 tons), Rim molding, Structural foam molding, Compression molding, Polyester resin transfer molding (RTM), Slab welded thermoplastics, Blow molding, Extruding, Vacuum forming, Pressure forming, Rotation molding, Plastic casting, Plaster casting, Silicone molding, Structural Reaction Injection Molding (SRIM), Solvent / adhesive bonding, Ultrasonic welding, Painting, Pad printing.

Materials (dependant on manufacturing process)
ABS, Acetal, Acrylic, Acrylonitrile Butadiene Styrene (ABS), Epoxy resins, Fluoroplastic, Melamine, Phenolic, PPO / Noryl, Polyamide / Nylon, Polycarbonate (PC), Polyester, Polyethylene, Polyimide, Polypropylene (PP), Polyphenylene oxide, Polystyrene (PS), Polysulphone, Polyvinyl chloride (PVC) and other speciality materials as required.

Typical Savings are 30%+ after all shipping costs.